View TLP525G-2_4108850.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP525G,TLP525G-2,TLP525G-4
TOSHIBA Photocoupler GaAs IRed & Photo-Triac
TLP525G,TLP525G-2,TLP525G-4
Triac Drive Programmable Controllers AC-Output Module Solid State Relay
The TOSHIBA TLP525G, -2 and -4 consist of a photo-triac optically coupled to a gallium arsenide infrared emitting diode. The TLP525G-2 offers two isolated channels in an eight lead plastic DIP package, while the TLP525G-4 provides four isolated channels in a sixteen lead plastic DIP package. * * * * * Peak off-stage voltage: 400V (min.) Trigger LED current: 10mA (max.) Peak on-stage current: 2Apk (max.) Isolation voltage: 2500Vrms (min.) UL recognized: File no.E67349 TOSHIBA Weight: 0.26g 11-5B2 Unit in mm
Pin Configurations (top view)
TOSHIBA Weight: 0.54g
11-10C4
TOSHIBA Weight: 1.1g
11-20A3
1
2007-10-01
TLP525G,TLP525G-2,TLP525G-4
Absolute Maximum Ratings (Ta = 25C)
Rating Characteristic Forward current Forward current derating LED Pulse forward current Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector On-state current derating (Ta25C) Peak on state current Peak nonrepetitive surge current (PW = 10ms, DC = 10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature Isolation voltage (Note) Ta = 25C Ta = 70C Symbol IF IF / C IFP VR Tj VDRM IT (RMS) IT / C ITP ITSM Tj Tstg Topr Tsol BVS 100 50 -1.1 TLP525G 50 -0.7 (Ta 53C) TLP525G-2 TLP525G-4 50 -0.5 (Ta 25C) Unit mA mA / C A V C V 80 40 -0.9 mA mA / C A A C C C C V rms
1 (100s pulse, 100pps) 5 125 400
2 (100s pulse, 120pps) 1.2 115 -55~125 -40~100 260 (10s) 2500 (AC, 1min., R.H. 60%)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note: Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together.
Recommended Operating Conditions
Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP525G,TLP525G-2,TLP525G-4
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt (c) Test Condition IF = 10mA VR = 5V V = 0, f = 1MHz VDRM = 400V ITM = 100mA Vin = 120Vrms, Ta = 85C (Figure 1) Vin = 30Vrms, IT = 15mA (Figure 1) Min. 1.0 200 Typ. 1.15 30 10 1.7 0.2 500 0.2 Max. 1.3 10 100 3.0 Unit V A pF nA V mA V / s V / s
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Trigger LED current Capacitance input to output Isolation resistance Symbol IFT CS RS Test Condition VT = 3V VS = 0, f = 1MHz VS = 500V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x10
10
Typ. 5 0.8 10
14
Max. 10
Unit mA pF Vrms Vdc
2500
5000 5000
Fig.1 dv / dt Test Circuit
3
2007-10-01
TLP525G,TLP525G-2,TLP525G-4
4
2007-10-01
TLP525G,TLP525G-2,TLP525G-4
5
2007-10-01
TLP525G,TLP525G-2,TLP525G-4
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01

▲Up To Search▲

Price & Availability of TLP525G-2

	To Download TLP525G-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .